How to fix Dell Inspiron shutting down problem

Whether you use your Dell Inspiron at house, office or anywhere, surprising shutdowns can be harmful to your efficiency.

If your Dell Inspiron system shuts down suddenly, you could lose hours' worth of valuable work and even cause damage to your operating system. Since a number of things can cause this Dell computer problem, it is best to take a methodical strategy to issue solving. Get the solution below-

Before perform any other procedure, check that there is no problem with power cord. It is a rough idea but you can also replace the power cord with new one…also get here how to factory reset Dell Inspiron.

A not working side-line system can also cause the Dell Inspiron for shutting down suddenly and why Dell computer starts rebooting. You can analyze for this issue by disconnecting everything but the laptop key pad and computer mouse. Run Dell Inspiron with the side-line devices turned off to see if the close down issue eliminates itself. If it does, add the side-line devices back one at a time until you look for the issue system. Once you look for the issue device, you can try installing a new driver for it. If that doesn't work, you can simply substitute the not working device. Also get here how to fix if sound not working on dell laptop.

System Overheating is another most common causes of surprising shutdowns in the Dell Inspiron system. When the system starts to run hot, it shuts down to secure sensitive elements from extreme heat. In many cases, overheating is due to accumulate of trash and dust inside the computer case. To fix this, eliminate the PC's case, and then apply compacted air into the system case to affect dust reduce and strike it out of the case. Also get here what to do if bluetooth problem in Dell Inspiron 1525 laptop.

A corrupt or failing hard drive can also cause surprising shutdowns, and this is one problem for which you want an early warning. You can run on board diagnostics by watching for the Enter Setup prompt as you start your computer. In the Installation selection, look for the Diagnostics menu and then run all available tests on the hard drive. Get here how to fix Dell laptop hard disk 0146 error code.

If you find that the hard drive is failing, you need to back up your important information to an external storage device before a new hard drive.

See also: Remove shutdown virus >>

How to make Dell Inspiron run faster

If you are a Dell Inspiron user, you may be experiencing a slow down in computing performance. This is the general as a computer ages and the hard drive is filled with data. Because the Dell Inspiron system that comes with the Windows operating system, you can use some utilities on Windows that can help make your Dell Inspiron run faster.

Find below some Dell help tips to fix slow PC problem of your Dell Inspiron to make it faster -

Step 1: First check your total hard drive free space. The little memory space can cause for slow system. You can perform 'Disk Cleanup' utility to delete temp files & allocate free hard disk space. For perform 'Disk Cleanup' utility, go to 'Start -> All Programs -> Accessories -> System Tools ->Disk Cleanup'. Get here what are common Dell Inspiron 1525 problems and solutions.

Step 2: You can also perform disk defragmentation in your Dell Inspiron system to manage saved file memory location in a single place so that it can access faster. Rather than if your file are saved in different locations on the hard drive, your Dell Inspiron system will take much time to search it. Get here how to factory reset Dell Inspiron.

Step 3: You can perform 'Error Checking' utility to check for any issue in your Dell Inspiron hard disk. These hard disk errors are generally not noticeable but it can cause for slow hard disk or slow computer. To perform 'Error Checking' utility, Right-click on Mycompputer icon and click properties option. Click the 'Tools' tab followed by 'Check Now'. Get here how to fix 0146 hard disk error code in dell laptop.

Step 4: It is recommended to perform virus removal program to scan your system at daily basis to check for any virus and malware in your Dell Inspiron system. Get here how to block and remove Malware.

Step 5: You can also increase your RAM if you are not satisfied by the general performance of your Dell Inspiron.

Dell Inspiron - How to factory Reset

Resetting a Dell Inspiron to the factory settings allows the user to restore the Dell Inspiron to the original operating condition as if it was just taken out of the box. Dell system includes a restore utility called 'Dell Symantec System Restore' to reset or restore your Dell system to factory setting. Also get here how to make Dell laptop run faster.

This utility is convenient because you're not forced to use the Windows startup CD to restore your computer. 

Find below Dell help guide to reset your Dell laptop/computer to factory setting -

Step 1: Before reset any Dell Inspiron laptop, backup your all important data and programs, otherwise you may lose it. It is recommended to use an external storage device for your entire data backup, so that you couldn't lose it in any sudden occurring issue…Also find here Dell help guide if bluetooth problem in Dell Inspiron 1525 laptop.

Step 2: Remove any other unnecessary external drive and restart your Dell Inspiron laptop.

Step 3: Press 'F8' key continue until 'Advanced Boot Options' wouldn't be appear.

Step 4: Use your keyboard arrow key to select 'Repair Your Computer' from the list and hit 'Enter'.

Step 5: Now click 'Next' and login as the administrator account.

Step 6: Click 'Dell Factory Image Recovery and Data Safe options', select your language option and click 'Next'.

Step 7: Click the check box 'Yes, reformat hard drive and restore system software to factory condition' and click 'Next' to start Dell Inspiron reset process….Also find here why Dell laptop randomly shut down?

This process will erase all your previous changes that have been made to the Dell Inspiron laptop and reset the configuration settings to factory setting.

See also: How to Restore/Reset Dell Vostro to Factory Setting >>

How to stop Acer laptop from shutting down

Acer laptop has a variety of power options that will make your laptop perform certain actions when you change the system state. Your default selected 'Power Plan' includes an auto-shut down once Windows senses that the lid of the computer has been closed. Get here how to fix Acer laptop's screen.

If you would like to prevent your Acer laptop from shutting down, adjust the settings of your 'Power Plan' in the control panel. Follow the Acer help guide below to preventing your Acer laptop from shut-down:

Step 1: Simply Click 'Start -> Control Panel'.

Step 2: Click 'Power Options'.

Step 3: Now move to the left side of the window and click on 'Change What Closing the Lid Does' link.

Step 4: Click 'Closing the Lid' drop down menu and select either 'Sleep', 'Hibernate' or 'Do Nothing'.

Step 5: All three of these options will stop your Acer laptop from shutting down completely when you close the lid. Click 'OK' to save changes.

If your laptop shuts down after some time without any reason and warning, check if the cooling fan spins. Usually it makes some noise and you can hear it. If the fan works fine, then check if the heat sink is clogged. 

In some cases you can clean the heat sink with compressed air, just blow inside the fan openings on the laptop bottom. Get here how to factory reset Acer laptop.

If the heat sink is completely clogged, then it is necessary to remove the heat sink for cleaning.

See also: Is your dell laptop fan break down? >>

Make Dell Laptop Run Faster: How To

Are you frustrated with the slow performance of your Dell laptop? You can quickly fix this slow PC problem and prevent it from happening again, all with a few clicks. Simply apply some easy tips as discussed below to make your Dell laptop/computer make faster -

• Run hard disk defragmentation once a month to improve Dell laptop speed. You can perform this operation with just few clicks. Go to your desktop and right click on My Computer icon, and then click 'properties'. Click 'Tools' lab, click 'Defragment Now', and then click 'Defragment'. Now the disk defragmentation process will start, it will take some time to complete depending on how long it has been since the last time your Dell laptop was defragmented. Get here how to fix Dell laptop hang/freeze problem.

•  Disable your Windows system unnecessary graphics to increase RAM performance. You can easily manage it, just go to 'Start' and type 'Adjust the appearance and performance of Windows', then click 'Adjust for best performance' and click on 'OK'. This setting will increase the performance of your Dell laptop. Find here how to reformat Dell computer without cd/disk.

• ·         Perform virus removal regularly with a latest updated antivirus to check for any security threats.

• Install & run a registry cleaner program. It will give you a list of many different types of files that can be safely removed from a computer. These files may be cookies, temporary files and some other corrupt files and registry key. It will also fix some other registry issue. Also find here how to fix common Dell printer problems.

• You can also remove some unwanted programs from your laptop to increase memory space.

See also: Restore/Reset Dell Vostro to Factory Setting >>

How to add wirelss printer to wireless router network

You can simply add your wifi printer to your wifi router in just a few easy actions to create a completely wifi home system. Your printing device can then provide as the system printing device, and any computer with wifi ability can be set up to share the same printer. Some wireless routers are outfitted with 'one-touch' Wi-Fi Protected Setup (WPS) buttons.

If you have a latest wireless printer and wireless router, you can easily setup printer in wireless network them in few minutes.

Step 1: First check the wireless router handbook instruction to find out that the Wi-Fi Protected Setup (WPS) is available on your device.

Step 2: Now turn on your wireless printer and open the network options using its touch screen. Now locate three the network settings option of your printer. Get here what to do if your wireless not detected/found.

Step 3: Now select 'push button setup (WPS)' or 'wireless setup wizard' in your router setting page. Different Router manufactures may have their own menu labels, so look for similar wording.

Step 4: Now follow the instruction as show in setup wizard. In this step you will have to enter your wireless network's password and the WEP key WEP key you set up when you installed your wireless router.

Step 5: Now insert and run your wireless printer CD in your system to install the necessary printer drivers. Follow the setup wizard to finish driver installation.  Also find here how to update HP printer drivers.

Now you are ready to use your wireless printer. Simply print a test page to check that it is working or not.

I hope it will worth.

Also find here how to install HP printer on a Mac system.

Note: The given solution is only for one computer in your wireless network. If you want to add more than one printer in your wireless network, install the printer software on each of the computers that prints to the network.

How to Remove Windows Runtime Error

A runtime error is a problem that interrupts programs from working correctly. It indicates that there are bugs in the program/software. Run time errors may also occur if your system files are obsolete or corrupt.

Follow the Windows repair steps as mentioned below to easily fix this type of errors-

Step 1: Go to 'Start -> Run', type 'msconfig' and hit 'Enter' key. 'System Configuration Utility' window will be appeared.

Step 2: Click label 'General -> Selective Startup'. Now clear the check boxes for 'Process SYSTEM.INI', 'Process WIN.INI' and 'Load Startup Items'.

Step 3: Click 'Services' tab and select the checkbox to 'Hide All Microsoft Services'.

Step 4: Click 'Startup' tab label and select 'Disable All'. Click the checkbox next to one of the programs.

It’s time to restart your computer. If the runtime error is still occurring, then that was a conflicting program which you checked in Step 4. Now go to control panel and remove this conflicting program. 

If there is no runtime error after system restart, repeat the above steps until you find the conflicting program.

Don't forget to check Malware in your computer. Find here how to block and remove Malware.

After deletion of conflicting programs, install latest update for your Windows system. Get here how to run Windows update in Windows 7.

Also find here some additional tips to download critical Microsoft Windows updates.

See also: Where do Malicious Computer Viruses Come From? >>